Send Us E-Mail

Weekly Special


Manufacturers
Products
Data Collection
Services
Search
Feedback
Contact Us
Quick Links

 

 

 

 

 

Twinax Wiring Products


Item Number

DESCRIPTION

PURCHASE

CABLE-BALUN

Balun - A Twinax - to RJ45 adapter. Pins 4 & 5 Active. Allows a Twinax signal to run over a CAT3 or CAT5 Cable.  Good for distances of up to 2000 to 2500 feet on a CAT5 cable.  Not restricted to the 300 foot limitation of an Ethernet Signal. One balun is required for each Twinax device that is to be connected to a Twinax-to-RJ45 Active Star Panel.  

Click here for information on "What is a Balun??"

$  24.00

CABLE-BALUN6

Balun with 6 Inch Pigtail - Twinax-to-RJ45 Balun. Pins 4 & 5 Active with a 6 inch pigtail.  Ideal for tight locations where the extra cable length will make it easier to access and connect cables.

$  24.00


TRAN-3-4545

Transition Network Balun with Pins 4 & 5 Active - Twinax-to-RJ45 Balun.
Limited quantity.
Transition Network Part No. 3-4545

$  24.00


TRAN-3-4554

Transition Network Balun with Pins 5 & 4 Active Twinax-to-RJ45 Balun.
Limited quantity.
Transition Network Part No. 3-4554

$  24.00


TRAN-PSV-2/14-45R

Active Star Hub - A Twinax-to-RJ45 hub that allows a Twinax signal to run over a CAT3 or CAT5 Cable.

The Hub allows each of the 7 Twinax Addresses of a Twinax Host Port to be connected to individually with a CAT5 cable in the same manner Ethernet PCs are connected to an Ethernet Switch or Hub. Good for distances of up to 2000 to 2500 feet on a CAT5 cable.  Not restricted to the 300 foot limitation of an Ethernet Signal. One balun is required for each Twinax device that is to be connected to a Twinax-to-RJ45 Active Star Panel.  

$  450.00

CABLE-TWBRICK4

4-Port Twinax "Brick" - This item is connected to the Twinax Workstation Controller of smaller iSeries, AS/400 or S/36, as well as Twinax Remote Controllers such as the IBM 5494 or the Perle 494e and 594e.  You can connect up to 4 Twinax Cables or Baluns to this.  If the AS/400 or Remote Controller has a 4-port brick it will support up to a total of 28 Twinax device addresses.


Call 800-597-2525
for Pricing & Availability

CABLE-TWBRICK8

8-Port Twinax "Brick" - This item is connected to the Twinax Workstation Controller of the System i, i5, iSeries, AS/400 or S/36.  you can connect up to 8 Twinax Cables or Baluns to this.  Each Twinax Workstation Controller supports up to a total of 40 Twinax device addresses.


Call 800-597-2525
for Pricing & Availability

CABLE-TWINAX##

(## is length
of cable)

Standard Twinax Cable - Allows "Daisy Chaining" from one device to the next.  Highly resistant to outside electrical interference.  Good for distances up to 5000 feet. You can combine two standard Twinax cables together to get a longer length cable by connecting them with a Twinax Female/Female Connector described below.


Call 800-597-2525
for Pricing & Availability

CABLE-TWINAXEND

Twinax Cable Ends - Each end of a standard Twinax cable has two male connectors with two pins that connects to a female Twinax connector that is either on an AS/400 or S/36 Twinax Workstation Controller, Twinax ports on Remote Controllers, or the Host In port on an Twinax-to-RJ45 Active Star Panel.  You can combine two standard Twinax cables together to get a longer length cable by connecting them with a Twinax Female/Female Connector described directly below.


Call 800-597-2525
for Pricing & Availability

CABLE-TWINAXFF

Twinax Female/Female Connector - Used to join two standard male end  Twinax cables together to increase length.  Also used to convert a male end of a cable to a female end to allow the attachment of a Balun when a need exist to convert from standard Twinax cable to RJ45.  This is required when using Twinax star panels or hubs that have female RJ45 ports and the existing cable runs are standard Twinax cable.

$  18.00



Twinax Signal - A Twinax signal is the signal generated from the Twinax port of an IBM AS400, iSeries, S/36, or remote controllers that is sent over cabling to run a Twinax display station, Twinax printer or other Twinax peripheral device.  A Twinax signal can be transmitted over a standard Twinax cable, CAT3 or CAT5 cables when equipped with Baluns at each end of the cable, or over a fiber optic cable when using the appropriate Twinax-to-Fiber Optic Converter or Twinax-to-Fiber Optic Multiplexor.

 

Information Request Form

Wiring Products Information

 

 

iSeries & AS/400 Wiring Products Information Request Form
Have a salesperson contact me
Send product literature
Send company information
Immediate
30 Days
60 Days
90 Days

* Required

 

Wiring Products Info Request - New 051116
 

 


|
Home |  | Products |  | Manufacturers |  | Weekly Special |  | Services |  | Search |  | Shopping |  | Quick Links |
| Feedback |  | Site Map |  | Company & Contact Information |  | Privacy Policy |

 

 
PLEASE CLICK HERE to send us questions or comments about this web site.
Telephone:  USA 800-597-2525 / International 908-688-8100 / FAX 908-688-8160
Copyright 2017 Twin Data Corporation